Switches' Functions - G-Lab WOWEE-WAH User Manual

Switches' functions

BASS – Switch
LOW – bass attenuation like in a classic wah-wah,
HIGH – without bass attenuation,
DEEP – Switch changing the effect intensity,
HIGH position – decreases the signal level of the
frequencies behind the resonance what increases
effect intensity in all range of pedal regulation, a side
effect is attenuation of the signal (it is recommended to
set VOL switch on HIGH position),
Q FACTOR – Quality factor of the resonance circuit switch,
HIGH position - increases resonance signal level
especially of low part of the regulation band (high pedal
positions) what intensifies the wah-wah effect,
VOLUME – Volume of the effect signal,
HIGH position – increases the signal by 3,5dB
5