Table of Contents
Advertisement
Call Information
Call Charges
To maintain control over the cost of calls that are made, the phone can be
set to restrict use to a finite number of units overall. (Q)
Setting the Unit Price
Firstly, a price per unit must be entered. This is the cost that the Service
Provider charges for one unit of call time. (Q)
1
From Idle Z Q , select Phone Menu > Call Service >
Service Charges > Price/Unit Z Q
2
Z Q to edit the values
At this point you will be asked to enter your PIN2 or Lock code Z Q .
3
Enter a currency unit (up to three characters) e.g. GBP Z Q
twice
4
Enter a price Z Q twice
Setting the Maximum Unit Level
This function allows the user to pre - determine the maximum cost of calls
made. (Q)
1
From Idle Z Q , select Phone Menu > Call Service >
Service Charges > Max Cost Z Q
2
Z Q twice to edit the values
At this point you will be asked to enter your PIN2 or lock code Z Q .
3
Enter a value (number of units) which is to be the maximum
permitted, and the corresponding cost will be displayed
4
Z Q twice to accept
Note: The duration of one unit may vary during the day, peak and off-peak
times. Therefore, the call charge can be calculated accordingly. However,
call charge information may not give an accurate reflection of the tariffs
charged by your Service Provider.
Setting a Warning Level
A warning can be set as an indication that the maximum cost is about to be
reached. This function is SIM dependent.
1
From Idle Z Q , select Phone Menu > Call Service >
Service Charges > Warning at Z Q
2
Z Q twice to edit the value
40
Advertisement
Table of Contents
