REPLACEMENT OF MAIN PARTS
IMPORTANT: Before replacing any part always
DISCONNECT THE CLEANER FROM THE
ELECTRICITY SUPPLY.
•
MOTOR / CARBON BRUSHES
(1) Motor
1. Remove 1 screw from the pedal cover and take it out.
(Fig. 1)
2. Remove dust cover ass'y prising on its support with a
flat-head screwdriver. (Fig. 1-a)
3. Take out exhaust cover. Then remove 4 screws from the
upper body and take it out. (Fig. 2)
Screw
Pedal
cover
Exhaust
cover
11
Fig. 1
Dust cover
assembly
Fig. 1-a
Upper body
Cord reel
assembly
Motor
assembly
Fig. 2