Panasonic SC-PM9 Operating Instructions Manual page 21

A
CLOCK/
TIMER
B
SLEEP
–AUTO OFF
Using the timers
CLOCK/ To cancel the timer
TIMER
Press [˚PLAY/REC] to clear the timer indicators from the
display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when unit is on)
• To change the play/record times
Do steps 1, 2, 3, and 5 on the previous page.
1
• To change the source or volume
2
3
A Using the play/record timer
To check the settings (when unit is off)
Press [CLOCK/TIMER] twice.
(When the unit is on, press [CLOCK/TIMER] to select "˚PLAY"
or "˚REC".)
Every time you press the button:
The timer conditions are shown in the following order:
Play timer: start time → finish time → source → volume
Record timer: start time → finish time → source
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer's start time.
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in the
standby mode.
B Using the sleep timer
SLEEP
–AUTO OFF
Set the unit to stop and turn off after the certain time.
While enjoying the desired source:
Press [SLEEP, –AUTO OFF] to select the desired
time.
Every time you press the button:
To
cancel the sleep
timer
confirm the
remaining time
change the time
remaining during
operation
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
Press [˚ ˚ ˚ ˚ ˚ PLAY/REC] to clear the timer indicator from the
display.
Make changes to the source or volume.
Do steps 4 to 5 on the previous page.
CLOCK
PLAY
REC
Note
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP OFF
Action
Press [SLEEP] to select "SLEEP
OFF".
Press [SLEEP].
Press [SLEEP] to show the remaining
time, and then press [SLEEP] to
select the desired time.
Note
SLEEP 120
21
RQT7360