Panasonic SC-PM9 Operating Instructions Manual page 18

A
ALBUM
( , )
2
4 /REW/ 4,
3 /FF/ ¢
1
3 8
CD /
2
PLAY MODE
3
REC
B
Tab for side B
To re-record
Normal tape
18
RQT7360
1
4 /REW/ 4,
3 /FF/ ¢
©
7
STOP
Side A
Tab for side A
Adhesive tape
Recording CDs
Preparation:
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
3
A To record specific CDs/tracks
1
Press [CD 3/8] and then [STOP 7].
2
Press [PLAY MODE] to select your desired mode.
1-TRACK
Mode
1-TRACK
1-ALBUM
RANDOM
For 1-TRACK mode
Press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢] to select the track.
For 1-ALBUM mode (MP3)
Press [ALBUM (
3
Press [¶/8 REC] to start recording.
To
stop recording
stop recording
temporarily
To record programmed tracks
This function allows you to record up to 24 programmed tracks.
1
Programme the track(s) you want.
(\ steps 1 - 4 on page 12)
2
Press [¶/8 REC] to start recording.
B Erasure prevention
The illustration shows how to remove the tabs to prevent re-
cording. To record on the tape again, cover as shown.
To erase a recorded sound
1
2
Insert the cassette to be recorded on (\ page 17).
3 Press [TAPE] and then [STOP 7].
Press [¶/8 REC].
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
1-ALBUM (MP3) RANDOM
Original display
To
record one selected track on the disc.
record one selected album on the
disc.
record the disc in random order.
or )] to select the album.
Action
Press [STOP 7, –DEMO].
¶/8
Press [ REC].
If the tape finishes before the CD,
press [STOP 7, –DEMO] to stop the
CD.
¶/8
Press [ REC] to resume
recording.