Table of Contents
Advertisement
3
INSTALLING THE AILERON SERVOS
Parts Needed
Assemble wing
2 standard size servos with mounting hardware
2 servo extensions (6 " or 9 " )
1. Install the recommended servo hardware supplied
with your radio system onto your servos (grommets
and eyelets). Install a minimum 6 " servo extension
onto each of your aileron servos.
Hint: It is always good procedure to tape the
extension connector and the servo lead connector
together to insure that they will not become
unplugged inside the wing.
2.
With the servo extension securely fastened to the
servo lead, tape the end of the servo extension to the
string you installed onto the end that exits were the
servo will be installed.
3.
Carefully pull the string through the wing until you
have the servo extension plug exit at the center of
the wing at the wing root.
Tools & Adhesives Needed
Hobby knife
Masking tape
4.
Install the servo into the aileron servo slot.
Note: It does not matter which way the servo is
installed into the slot; in other words, if the servo
horn is closer to the aileron.
5.
Securely fasten the servo in the aileron slot with four
of the servo mounting screws supplied with your
radio system.
Follow steps 1 – 5 for the other aileron servo.
6.
Hide quick links:
Advertisement
Table of Contents
