Tape-To-Tape Recording - Panasonic SC-AK62 Operating Instructions Manual

1
3
4
2
1
2
3
only
SC-AK77
4
SC-AK77
12
Tape direction of the tape you are
recording onto
SC-AK66
2
REC
SC-AK62
FLAT

Tape-to-tape recording

The recording level will be recorded as it is on the tape being played
back.
Press [TAPE, DECK 1/2].
Press [c OPEN] on both decks and insert the tapes.
For playback: Into deck 1
For recording: Into deck 2
Close the holders by hand.
SC-AK77 only
Press [REV MODE] to select the reverse mode.
Every time you press the button:
:One side records only.
:Both sides record (front ¡ reverse).
,
" "
automatically changes to "
pressed.
Press [TAPE EDIT] to start recording.
To stop recording
Press [L].
Both decks will stop.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
SC-AK44
SC-AK77
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [/] and immediately thereafter [L]. The tape direction will
be shown as "4".
SC-AK66 SC-AK62
To record on the other side of the tape
Turn the tape over and press [TAPE EDIT].
" when [TAPE EDIT] is
23
RQT5769