6Ch Discrete Input Mode - Panasonic SC-AK62 Operating Instructions Manual

1
30
RQT5769
SC-AK77
SC-AK66
SC-AK62
SC-AK77
SC-AK66
SC-AK62

6CH DISCRETE INPUT mode

1
Press [6CH INPUT].
Playback the source (DVD).
To adjust the volume of each speaker
Sit in the normal listening position and make the adjustments with the
remote control.
1 Output the test signal from the DVD player (not included).
Set the channel level to 0 dB on the DVD player, and adjust the
channel level on this system.
2 Press [VOLUME (– or +)].
Set the volume to the normal listening level.
The following steps are for setting the output level of the front speakers
and the other speakers to approximately the same level.
3 Press [CH SELECT].
Select the speaker channel to be adjusted.
Lch: Front speaker (Left)
Cch: Center speaker
Rch: Front speaker (Right)
RSch: Surround speaker (Right)
LSch: Surround speaker (Left)
SWch: Subwoofer
4 Press [CH LEVEL (– or +)].
Adjust the output level
+ : Increases the output level
– : Decreases the output level
Repeat steps 3 and 4 to adjust the level accordingly.
Notes
You cannot record sound when [6CH INPUT] is selected.
To record from DVDs, reconnect the DVD player (MIXED OUT) to
"AUX 1 or AUX 2" (SC-AK66 and SC-AK62: "AUX") terminal on this
unit.