Display Setting - Panasonic CQ-C7405W Operating Instructions Manual

Display Setting

Adjustment to display on the DISPLAY menu
1
Press [MENU] to display the menu
display.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press []] or [[] to display the
DISPLAY menu.
3
Turn [VOL] to select a function to be
adjusted.
For using the remote
control, use [}] or
[{].
4
Press [PUSH
SEL] to adjust.
For using the remote control, use [BAND] (SET).
5
Adjust the setting value.
6
Press [PUSH SEL].
For using the remote control, use [BAND] (SET).
7
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
DEMONSTRATION
Switching by [PUSH SEL].
ON:
OFF:
28
CQ-C7405W
MUTE
D ・ M
SBC-SW
MUTE
・
D M
SBC-SW
Demonstration screen at no operation
(default)
Regular screen
COLOR
(Setting range: 10 types, default: STORM)
The illumination color changes as follows.
SOURCE PWR
SQ Turn [VOL] to make a selection.
MENU
TUNE
STORM: The color varies in conjunction with time.
TRACK
FOLDER /P-SET/DISC
LEVEL: The peripheral color decoration lights up and
LIST
goes out according to the bass volume.
FIRE: Red
ORANGE: Amber
SKY: Blue
OCEAN: Aquablue
FOREST: Green
SUN: Yellow
SNOW: White
CUSTOM: You can create your favorite color.
SOURCE PWR
SQ
LEVEL ADJ
MENU
TUNE
TRACK
When LEVEL is setting in COLOR types, you can make a
FOLDER /P-SET/DISC
LIST
fine adjustment in the LEVEL ADJ display.
[]][[]: Function selection
Turn [VOL] to make a selection.: Item selection
Color selection
The illumination color changes.
(Setting range: FIRE, ORANGE, SKY, OCEAN, FOREST,
SUN, default: FIRE)
Volume setting according to lighting
(Setting range: LEVEL1, LEVEL2, LEVEL3, default: LEVEL
1)
If the peripheral color decoration keeps lighting because
the bass part is contained abundantly, select LEVEL 1,
and for the opposite case, select LEVEL 3.