Controller Installation And Usage; Selective Manual Controller Support And Manual Controller Installation; Preparing Before Installation - Titan Pro- Executive Operating Instructions Manual

Massage chair
Method of usage
Insert the handle controller frame assembly in to the cylindrical fixed pipe, be carefully
that the two groups hole out side and inside should be one to one correspond.(figure5)
Prepare two screws which tighten on two sides (figure 6)
( Figure 5)
Screw the two screws on two sides make it tighten, finish the installation( figure 7)
( Figure 7)

Controller installation and usage

Insert the handle controller in to the frame (figure 1), the frame can turn left and
rig ht freely. (Figure 2) and the handle controller can swing freely in horizontal
direction.
( Figure 1)
( Figure 2)
Instruction manual
( Figure 6
ENLARGE
FIGURE
( Figure 3)
Note:
As below are the selective parts, users can choose the different manual controller
support and manual controller according to the actual needs.

selective manual controller support and manual controller installation

manual controller
manual controller tray
press buttons of
Enlarge figure
manual controller
tray
support
manual controller
support assembly

Preparing before installation

Support Spring
Put the spring in the mounting hole of the upper support (figure 1)
Insert the plastic (figure 2)
( Figure 1)
Massage chair
Method of usage
manual
Plastic
controller tray
( Figure 2)
Instruction manual 27