Advertisement
General
[D•M] (Direct Memory)
CQ-C1121W
CQ-C1101W
tunes into the station memorized in D•M.
[VOL] (Volume) (Turn)
(Hold it down for more than 2 seconds to
memorize the current station.)
CQ-C1001W
Remote Control Sensor
▲
▼
(only for CQ-C1121W)
[VOLUME
] [VOLUME
] (Press)
adjusts the volume.
CQ-C1121W
MUTE
MUTE
lights when mute is on.
[SRC] (Source)
[MUTE]
[SQ] (Sound Quality)
selects a sound type (SQ).
selects a source.
toggles mute on/off.
(PWR) (Power)
toggles power on/off.
Power On/Off
SQ (Sound Quality)
Turn your car's ignition switch to the ACC or ON position.
SQ is a function that can call up various sound types at
the touch of button in accordance with your listening
Power on: Press [SRC] (PWR).
music type.
Power off: Hold down [SRC] (PWR) for
Press [SQ] to select the sound type as follows:
more than 1 second.
(FLAT) flat frequency response:
does not emphasize any part. (Default)
Source Selection
Press [SRC] to change the source.
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
Radio
Disc Player
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
Volume Adjustment
(VOCAL) clear sound:
(Setting Range: 0 to 40, Default: 18)
emphasizes middle tone and slightly empha-
CQ-C1121W
CQ-C1101W
sizes treble.
Turn [VOL].
CQ-C1001W
▲
▼
Press [VOLUME
] or [VOLUME
].
Mute
Note: Settings of SQ, bass and treble are influenced
ON: Press [MUTE].
(
lights.)
one another. If such an influence causes distortion to
OFF: Press [MUTE] again.
the audio signal, readjust bass/treble or volume.
Remote Control Unit (only for CQ-C1121W)
Note: This operating instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
[PWR] (POWER)
[MUTE]
toggles power on/off.
toggles mute on/off.
POWER
MUTE
MUTE
MUTE
PWR
PWR
VOL
VOL
[VOL
] [VOL
]
adjust the volume.
[MODE]
MODE
MODE
MODE
selects a mode. (source)
TUNE
TRACK
[TUNE ] [TUNE ]
[BAND]
BAND
BAND
BAND
down/up the frequency. (Hold it down for
selects a band in the radio source,
more than 2 seconds for seek tuning.)
toggles pause/play in the player source,
[TRACK
] [TRACK
and executes APM in the radio source.
skip to the previous/next track in the
(Hold it down for more than 2 seconds.)
CAR AUDIO
player mode.
Hold it down for fast reverse/fast forward.
Battery Replacement
Warning
Keep batteries away from children to avoid the risk of
Tough pointed object
Remove the battery holder
accidents. If an infant ingests a battery, please seek
with the remote control unit
immediate medical attention.
placed on a flat surface.
Stick your thumbnail into
Caution
the groove, and push the
Remove and dispose of the old battery immediately.
Do not disassemble, heat or short a battery. Do not
holder in the direction of
throw a battery into a fire or water.
the arrow at the same
Follow local regulations when disposing of a battery.
time.
Improper use of batteries may cause overheating, an
Pull it out in the direction
explosion or ignition, resulting in injury or a fire.
of the arrow using a
Note:
Battery Information:
tough pointed object.
Back side
Battery Type: Panasonic lithium battery (CR2025) (Included
in the remote control)
Battery Life: Approximately 6 months under normal use (at
Put a battery in the case
room temperature)
with (+)-side facing up.
Put the case back.
Radio (FM/AM)
[BAND]
selects a band in the radio source.
(APM) (
Auto Preset Memory)
executes APM in the radio source. (Hold it
down for more than 2 seconds.)
CQ-C1121W
MUTE
[SRC] (Source)
Preset buttons [1] to [6]
selects a source.
selects a preset station in the radio source,
and presets the current station. (Hold it down
for more than 2 seconds.)
1
3
Press [SRC] to select the radio source.
Select a station.
2
Press [BAND] to select a band.
Frequency adjustment
[TUNE ]: Lower
[TUNE ]: Higher
Note: Hold down either of them for more than 0.5
seconds and release it for station search.
Preset station selection
Press the corresponding preset button from [1] to [6] to
tune in a preset station.
Disc Player
Disc slot
takes a disc in with the label-side facing up.
Note: The power will be turned on automatically
when a disc is loaded.
( / ) (Pause/Play)
CQ-C1121W
toggles pause/play in the play-
er source.
MUTE
[SRC] (Source)
[1] to [6]
]
selects a source.
(7) to (12) (Hold down one of them for
more than 2 seconds.)
select a track directly.
(SCAN)
toggles on/off the scan play. (Hold it down for more than 2
seconds.)
Caution
Do not insert a disc when the
indicator lights.
Refer to the section of "Notes on Discs".
This unit does not support 8 cm discs.
If you insert an 8 cm disc and cannot eject it, turn ACC of your car off once and turn it on again, then press [
This unit does not support MP3 and WMA disc playback.
This unit does not support CD text display.
Do not insert foreign matter into the disc slot.
1
Pause
Press [SRC] to select the Disc Player
source.
Press [BAND] ( / ).
2
Select a desired portion.
Press again to cancel.
Track selection
Direct track selection
Press [TRACK
] / [TRACK
].
Press a track number button from [1] to [6].
Note: To perform fast forward/reverse, hold down either
Hold down a track number button from [1]
of them.
to [6] ((7) to (12)) for more than 2 seconds.
[D•M] (Direct Memory)
lights while receiving an FM stereo signal.
tunes into the station memorized in D•M.
(Hold it down for more than 2 seconds to
Frequency
Band
Preset Number
memorize the current station.)
lights while receiving the D•M station.
[DISP] (Display)
switches the information on
the display.
[TUNE
] [TUNE
]
down/up the frequency. (Hold it down for
more than 2 seconds for seek tuning.)
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing one of the
preset buttons from [1] to [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions can
be automatically stored in the preset memory.
1
Select a band.
2
Hold down [BAND] (APM) for more than 2
seconds.
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the preset but-
tons from [1] to [6].
Note: New stations overwrite existing saved stations.
You can assign your favorite broadcasting station to the
[D•M] (Direct Memory) button. As the result of doing that,
your favorite broadcasting station can be received even if the
unit is turned off, or the CD mode is activated.
D•M station calling
1
Press [D•M].
Press again to cancel.
[TRACK
] [TRACK
]
Random indicator
skip to the previous/next track in the player
Play time
Track number
mode.
Hold down either of them for fast reverse/fast
forward.
lights when a disc is in the player.
Repeat indicator
[
] (Eject)
ejects the disc.
[DISP] (Display)
switches the information on
the display.
Random play
[REP] (Repeat)
toggles on/off the repeat play.
All the available tracks are played in a random sequence.
(RANDOM)
Hold down [REP] (RANDOM) for more than
toggles on/off the random play. (Hold it down
2 seconds.
for more than 2 seconds.)
Hold down again to cancel.
Repeat play
The current track is repeated.
Press [REP].
Press again to cancel.
] (Eject).
Notes on CD/CD Media
If you use commercial CDs, they must
have the label shown at right.
Some copy-protected music CDs are not
playable.
How to hold a disc
Do not touch the underside of a disc.
Do not scratch on a disc.
Do not bend a disc.
When not in use, keep a disc in a case.
The corresponding track (1–6) starts playing.
Do not use irregularly shaped discs.
Do not leave discs in the following places:
In direct sunlight
Near car heaters
The corresponding track (7–12) starts playing.
Dirty, dusty and damp areas
Seats and dashboards
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Do not attach any seals or labels to your discs.
Do not write on the disc label with a ballpoint pen
or other hard-point pens.
Audio Settings
CQ-C1121W
CQ-C1101W
Display change
[VOL]
Press [DISP] to change the display.
selects a value in the audio menu.
(PUSH SEL) (Push to Select)
selects items in the audio menu.
Radio source display (Default)
CQ-C1001W
▲
▼
[
] or [
]
selects a value in the audio menu.
Clock display
[SEL] (Select)
selects items in the audio menu.
1
Display the audio menu.
CQ-C1121W
Press [VOL] (PUSH SEL).
CQ-C1001W
Press [SEL].
2
Manual station preset
Select a mode to be adjusted.
CQ-C1121W
1
Tune into a station.
Press [VOL] (PUSH SEL).
2
Hold down one of the preset buttons from
CQ-C1001W
to
for more than 2 seconds.
[1]
[6]
Press [SEL].
(Setting Range: 0 to 40, Default: 18)
(blinks once.)
Note: New stations overwrite existing saved stations.
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
D•M station writing
1
Select a station you would like to preset.
(Setting Range: 15 levels each and 0 (center),
Default 0)
2
Hold down [D•M] for more than 2 seconds.
(Setting Range: 15 levels each and 0 (center),
Default 0)
Note: If the fader is set to front, the pre-amp. output
(rear) is decreased.
Troubleshooting
If You Suspect Something Wrong
Display change
Check and take steps as described below.
Press [DISP] to change the display.
If the described suggestions do not solve the problem, it is recom-
mended to take the unit to your nearest authorized Panasonic Service
Center. The product should be serviced only by qualified personnel.
Player source display (Default)
Please refer the checking and the repair to professionals. Panasonic
shall not be liable for any accidents arising out of neglect of checking
the unit or your own repair after your checking.
Clock display
Trouble
Check point
Common
●
Start the engine. (Or turn the ignition
Scan play
switch to the ACC position.)
●
Verify the wiring. (Ex. battery lead,
The first 10 seconds of each track is played in sequence.
power lead, ground lead, etc.)
No power
●
Hold down [SQ] (SCAN) for more than 2
Fuse blown (Contact the nearest
Panasonic Service Center.)
seconds.
●
Ask a professional for fuse replacement.
●
Be sure to use the same rated fuse.
●
Disable the mute function.
(blinks during scanning.)
●
Verify the wiring.
No sound
●
Wait until the dew disappears before
Hold down again to cancel.
turning on the unit.
●
Make sure that grounding is established
Noise
properly.
No sound from
●
Adjust the balance and fader.
left, right, front,
●
Verify the wiring.
or rear speaker
Notes on CD-Rs/RWs
Left and right
You may have trouble playing back some CD-R/RW discs
sounds are
●
Connect the speaker lead correctly.
recorded using CD recorders (CD-R/RW drives), either due
reversed
to their recording characteristics or dirt, fingerprints,
scratches, etc. on the disc surface.
Radio
CD-R/RW discs are less resistant to high temperatures and
high humidity than ordinary music CDs. Leaving them
●
Tune in to another station of high-inten-
inside a car for extended periods may damage and make
Frequent
sity waves.
playback impossible.
●
noise
Make sure that the antenna mounted
Some CD-R/RWs cannot be played back successfully due
point is grounded properly.
to incompatibility among writing software, a CD recorder
(CD-R/RW drive) and the discs.
●
The preset memory is cleared to return
This player cannot play the CD-R/RW discs if the session is
Preset data
to the original factory setting when the
not closed.
deleted
power connector or battery is discon-
This player cannot play the CD-R/RW discs which contain
nected.
other than CD-DA data (MP3/WMA, Video CD, etc.).
Be sure to observe the instructions of the CD-R/RW disc
for handling it.
CQ-C1121W
MUTE
[DISP] (Display)
exits from the audio menu.
MUTE
Note: If no operation takes place for more than 5 seconds
in the audio menu (2 seconds in Main volume adjustment),
CQ-C1101W
the display returns to the regular mode.
3
Adjust.
CQ-C1101W
CQ-C1121W
CQ-C1101W
Turn [VOL].
[▲]
[▼]
CQ-C1001W
Press [▲] or [▼].
Volume
[▲]: Up
[▼]: Down
Bass
[▲]: Increased
[▼]: Decreased
Treble
[▲]: Increased
[▼]: Decreased
Balance
[▲]: Right enhanced
[▼]: Left enhanced
Fader
[▲]: Front enhanced
[▼]: Rear enhanced
Warning
Do not use the unit in an irregular condition, for example, with-
out sound, or with smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop using the unit and
consult your dealer.
Never try to repair the unit by yourself because it is dangerous
to do so.
Trouble
Check point
CD Player
No sound, or disc
●
Load the disc correctly.
is automatically
●
Clean the disc.
ejected
Sound skip,
●
poor sound
Clean the disc.
quality
Sound skip
●
The maximum permissible tilt angle is
due to
30°.
●
vibration
Secure the unit.
●
Press [
]. If the disc is still not eject-
Disc not
ed, contact the nearest Panasonic
ejectable
Service Center.
Error Display Messages
(The disc is ejected automatically.)
The disc is dirty, or is upside down.
The disc has scratches.
●
Check the disc.
No operation by some cause.
●
If normal operation is not restored, call
the store where you purchased the unit
or the nearest Service Center to ask for
repairs.
Advertisement
