Dodge CHARGER 2015 Owner's Manual page 294

292 UNDERSTANDING YOUR INSTRUMENT PANEL
• Blind Spot Alert
When this feature is selected, the Blind Spot Alert feature
Provides alerts, visual and/or audible, to indicate objects
in your blind spot. The Blind Spot Alert feature can be
activated in Lights mode. When this mode is selected, the
Blind Spot Monitor (BSM) system is activated and will
only show a visual alert in the exterior mirrors. When
Lights & Chime mode is activated, the Blind Spot Moni-
tor (BSM) will show a visual alert in the exterior mirrors
as well as an audible alert when the turn signal is on.
When Off is selected, the Blind Spot Monitor (BSM)
system is deactivated. To change the Blind Spot Alert
status, press the "Off," "Lights," or "Lights & Chime"
button on the touchscreen. Then press the back arrow/
Done button on the touchscreen.
NOTE: If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result
in the BSM not operating to specification.
• ParkView® Backup Camera Active Guidelines
Your vehicle may be equipped with the ParkView® Rear
Back Up Camera Active Guidelines that allows you to see
active guidelines over the ParkView Back up camera display
whenever the shift lever/gear selector is put into REVERSE.
The image will be displayed on the radio touchscreen
display along with a caution note to "check entire surround-
ings" across the top of the screen. After five seconds, this
note will disappear. To enable or disable, press the
"ParkView® Backup Camera Active Guidelines" button on
the touchscreen, and select "On" or "Off." Press the back
arrow/Done button on the touchscreen to return to the
previous menu.