Silvercrest SUR 46 A1 Operation And Safety Notes page 78

Operation
1. Close the cover
180
The figure
3 Min
ard – this is the standard time for a normal degree of soiling.
2. Select the desired time from five possible intervals:
( g
180 300
set the desired time according to the degree of soiling.
3. Press the On-switch
The blue indicator light
in the display
Note: During the cleaning process a quiet vibration noise can be
heard; this is caused by the cleaning process.
4. After the set time has elapsed the cleaning process is automatically
stopped, the blue indicator lamp
shows . The originally selected time interval in minutes/sym-
000
bol remains visible.
5. Press the Off-switch
necessary. The time remaining from the selected time interval is
shown on the display
the cleaning process
timer button
m
I mportant! You can repeat the cleaning process in order to
intensify the cleaning effect.
If the cleaning process is started several the liquid becomes very
warm (approx. 41°C after the first cleaning process and approx.
60°C after the third in spite of a five-minute cooling down phase).
However, it is recommended that between the cleaning processes
a pause of at least five minutes is inserted in order to allow the de-
vice to cool down. Do not change the time interval while a cleaning
process is still running. Allow the time interval to expire normally,
thus ensuring that the cleaning process is properly time-controlled.
6. If you wish to repeat the cleaning process, press the timer button
The next timing program appears on the display
78 GB/MT
and insert the mains plug
5
(180 seconds) appears in the display
g g g
480 090
and start the cleaning process.
1
on the lid
6
counts down to 0.
2
to stop the cleaning process prematurely if
3
. Press the On-switch
2
. Or select a new time interval using the
1
and press the On-switch
4
12
). Use the timer button
600
illuminates while the time
5
goes off and the display
6
again.
1
.
2 as stand-
to
4
2
again to resume
1
.
2
.
4