Table of Contents
Advertisement
Configuring Security - WEP
Note: IEEE802.11n only supports WPA2-PSK or WPA-PSK AES encryption. If you use WEP as
your encryption, wireless data rate will drop to 54Mbps (802.11g standard).
Select HEX or ASCII. You can select ASCII (alphanumeric format) or
Key Mode:
Hexadecimal (in the "a~f" and "0~9" range) for the key format.
Select 64 bits or 128 bits key length.
WEP:
Select a WEP Key you wish to use and enter key value.
Key 1~4:
If you select HEX and 64 bits, enter a 10-digit Hex key, for example,
"12345abcde".
If you select ASCII and 64 bits, enter a 5-digit ASCII key, for example,
"xyz01".
If you select HEX and 128 bits, enter a 26-digit Hex key, for example,
"12345abcde67890bcdef123456".
If you select ASCII and 128 bits, enter a 13-digit ASCII key, for
example, "wepkeyexample".
43
Advertisement
Table of Contents
