Table of Contents
Advertisement
DesCriPtiOn Of OPeratiOn
•
St. Spread – Wider or narrower stereo image of the played sample. The central position (Normal) is a neutral setting that plays
the sample without processing.
•
Panning – (Stereo) panning.
•
High Cut - Low-pass filter cut-off frequency. The parameter operates from 2 [Hz] up to 22 [kHz].
•
Low Cut - Hi-pass filter cut-off frequency. The parameter operates from 2 [Hz] up to 22 [kHz].
•
Decay – Decay time relative to the overall sample duration. Max means that the decay time is the same as the sample duration.
•
Tune – Relative sample tuning from -6 up to +6 semitones.
•
Send (Click send, Top send, Tools send) – Controlling the proportion between the signal sent to the effect cascade and directly
to Master / Limiter (with the effect cascade bypassed). For the minimum value (0%) the whole signal is sent only to Master / Limiter
(Effects). For the medium value (50%) the generator output is sent in half to the effect cascade and in half to Master / Limiter with
the effect cascade bypassed. For 100% the signal is sent only to the effect cascade.
Each generator provides an additional Sample Management subsection to browse and load the samples from the Factory or User content,
import the user samples and reset the generator settings.
Generator's Sample Management section
www.d16.pl
•
GeneratOrs seCtiOn
7
Hide quick links:
Advertisement
Table of Contents
