Bitcrusher - D16 Group PunchBOX User Manual

DesCriPtiOn Of OPeratiOn

Bitcrusher

Bitcrusher is controlled with the following set of parameters:
• Preamp – Input signal's amplitude gain from 0 [dB] up to 48 [dB]
• Lowcut – Cut-off frequency of the passive high-pass filter that processes the signal before it is sent to the quantizer.
The filter operates from 3 [Hz] up to 300 [kHz].
• Quantize – The number of bits the signal is reduced to. Off means that the quantizer block is disabled.
• Sampling Freq – Resampler frequency from 44 [Hz] up to 44 [kHz]
• Resampling Filter – Activation of the image filter that processes the resampled signal.
• Bitcrusher preset management section
• Next/Prev – Navigation through the Bitcrusher preset bank. Loading of the next or previous preset
• Browser – Opens the Preset Browser (for more details on the operation please refer
to the Preset Management chapter)
• Init (Prev + CTRL) – Restoring the initial effect values
• Reload (Next + CTRL) – Restoring the last loaded master preset (Master Preset) values for the Bitcrusher
section
• Save (Browse + CTRL) – Saving the current effect settings as a preset
• FX Amount – Proportions between the Dry and Wet signals that will be sent to the next cascade effect.
www.d16.pl
•
effeCts seCtiOn
23