DesCriPtiOn Of OPeratiOn
Sample
A Sampler allows to use the samples as a sound source for Kick. To use it select Sample for Mode. The Sampler
contains the following parameters:
•
St. Width – Wider or narrower stereo image of the played sample. The central position
(Normal) is a neutral setting that plays the sample with the stereo image unchanged.
•
Pitch – Relative sample tuning from -4 up to +4 semitones.
•
Sample Start - Defines a starting point from which the sample is played. This parameter can be set
from 0% up to 100%, where 0% means that the sample is played from the beginning.
•
Level – Output generator volume.
•
High Cut - Low-pass filter cut-off frequency. The parameter operates
from 2 [Hz] up to 22 [kHz].
•
Attack – Amplitude's attack time from 0 [ms] up to 200 [ms]
•
Attack Curve - Amplitude attack's curve - from concave, through linear to convex
•
Decay – Amplitude envelope decay time relative to the overall sample duration. Max means that the
decay time is the same as the sample duration.
•
Decay Curve - Amplitude decay curve - from concave, through linear to convex
www.d16.pl
•
GeneratOrs seCtiOn
13