Generator Signal Routing - Send - D16 Group PunchBOX User Manual

•
DesCriPtiOn Of OPeratiOn
GeneratOrs seCtiOn

Generator Signal Routing - Send

By using Sends you can determine the proportion of the signal to be sent from each generator to the effect cascade or bypassed, i.e.
Sent directly to Master / Limiter. The Send parameters act as a cross-fader that determines the proportional relation between the signal
sent to the effect block and the signal that bypasses this block.
Send controls in the generators section
The minimum value means that the whole signal of the specific generator is sent directly to Master / Limiter. The maximum value means
that the whole signal is sent to the first cascade effect. The medium values determine the proportions between these two send variants.
The diagram below presents the topology of the send and direct outputs of the generators connected with the effects section:
18