Asc; Clutch - BMW K1300R Rider's Manual

4
50
Press and hold down button 1
until the ASC symbol changes
status.
z
ASC symbol appears on
the display.
Release button 1 within two
seconds.
ASC symbol continues to
show.
The ASC function is deactiv-
ated.
Activating the ASC
function
Press and hold down button 1
until the ASC symbol changes
status.
ASC symbol no longer
shows; if self-diagnosis has
not completed the ASC warning
light starts flashing.
Release button 1 within two
seconds.
ASC symbol still does not
show or continues to flash.
The ASC function is activated.
You also have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.

Clutch

Adjusting clutch lever
Changing the position of
the clutch-fluid reservoir
can allow air to penetrate the
clutch system.
Do not turn the handlebar fitting
on the handlebar.
Attempting to adjust the
clutch lever while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.