BMW K1300R Rider's Manual page 57

The damping you select
is shown in panel 1 of the
multifunction display and load
mode is shown in panel 2. The
meanings of the readings are as
follows:
COMF
: Comfortable damping
characteristic
NORM
: Normal damping char-
acteristic
SPORT
: Sporty damping char-
acteristic
One-up
One-up with luggage
Two-up (with luggage)
The setting shows briefly, then
disappears automatically.
Adjusting the chassis and
suspension
Start the engine.
Press button 1 once to view
the current setting.
To set the damping, repeatedly
short-press button 1 until the
setting you want to use ap-
pears on the display.
You can adjust the damping
characteristic while the mo-
torcycle is on the move.
To set the load mode,
repeatedly long-press button 1
until the setting you want to
use appears on the display.
The load cannot be set
while the motorcycle is in
motion.
The settings for damping and
preload shown on the display
are automatically accepted if
you allow a certain length of
time to pass without press-
ing button 1. The ESA setting
then automatically disappears
from the display.
4
55
z