Denon AVR-X4300H Owner's Manual page 212

Contents Connections
6
When the following screen is displayed, select "Begin
Test" and then press ENTER.
Start the measurement of the first position.
Audyssey Setup
Select "Begin Test" to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Ear Height
Back
Measurement requires several minutes.
0
NOTE
0 If "Caution!" is displayed on TV screen:
0 Go to "Error messages" (v p. 216). Check any related items, and
perform the necessary procedures.
0 If the volume level for the subwoofer is not appropriate, an error message
is displayed. See "Subwoofer level error message and how to adjust"
(v p. 217).
Front panel Display
Playback
Begin Test
212
Rear panel
Settings
7
When the detected speaker is displayed, select "Next"
and then press ENTER.
Audyssey Setup
Speaker Detection
Front :Yes
Center :Yes
Subwoofer :1spkr
Surround :Yes
Surr. Back :None
Repeat Last Test
Remote
Tips Appendix
Next
Index