Denon AVR-X4300H Owner's Manual page 184

Contents Connections
Volume
Set the MAIN ZONE (room where the unit is located) volume setting.
o Scale
Set how volume is displayed.
0 - 98
(Default):
–79.5 dB – 18.0 dB:
0 "Scale" settings are reflected in all the zones.
o Limit
Make a setting for maximum volume.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
Off (Default)
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0
dB". (v p. 184)
Front panel Display
Playback
Display in the range 0 (Min) to 98.
Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
Rear panel
Settings
o Power On Level
Define the volume setting that is active when the power is turned on.
Last
(Default):
Mute:
1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0
dB". (v p. 184)
o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
–40 dB :
–20 dB :
184
Remote
Tips Appendix
Use the memorized setting from the last
session.
Always use the muting on condition when
power is turned on.
The sound is muted entirely.
The sound is attenuated by 40 dB down.
The sound is attenuated by 20 dB down.
Index