Color System / Panasonic Auto; 3:2 Pulldown; Xga Mode - Panasonic TH-37PR11UK Operating Instructions Manual

High definition hospitality plasma display
Hide thumbs Also See for TH-37PR11UK:
Table of Contents

Advertisement

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input
signal mode.("SIGNAL [VIDEO]" menu is displayed.)
Mode
COLOR SYSTEM Set the color system to match the input signal. When selecting "AUTO", the color system is automatically
Panasonic AUTO
(4 : 3 )
Note:
Panasonic AUTO does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Notes:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during "VIDEO (S VIDEO)" input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during "COMPONENT" input signal.

XGA MODE

This menu is displayed when the input signal is Analogue (Component/PC). It allows switching between different XGA
signal settings for fi eld angle/sampling.
32
Press to select the "COLOR SYSTEM" or "Panasonic AUTO".
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level
or noisy input signals the image may in rare cases become
unstable. Should this occur, set the system to match the format
of the input signal.
selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on
the attached terminal board. To display M.NTSC signal, select "M.NTSC" in COLOR SYSTEM.
AUTO
Set to "4:3" to view 4:3 images in an unchanged format when Panasonic AUTO is selected.
If you would like to view 4:3 images in Just format, set to "JUST".
Press to select "3:2 PULLDOWN".
Press to set ON/OFF.
Press to select "XGA MODE".
Press to select "1024×768", "1280×768" ,
"1366×768".
Function
PAL
SECAM
M.NTSC
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC)
ON
COLOR SYSTEM
AUTO
3 : 2 PULLDOWN
OFF
Panasonic AUTO (4 : 3)
4:3
NTSC
3 : 2 PULLDOWN
OFF
XGA MODE
1024 × 768

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents