Board (Removing Of The Evf)-3 - Sony DCR-TRV22 Service Manual

DCR-TRV22/TRV22E
2-13. LB-085 BOARD (REMOVING OF THE EVF)-3
Caution
When attach the Sheet (VF),
fold the FP-619 flexible board
as shown in the illustration.
FP-619 flexible
board
Sheet (VF)
Pull out the VF slide assembly fully
2
in the direction of the arrow.
VF slide Cabinet (upper) assembly
VF slide assembly, etc.
B
Remove the LCD cabinet assembly and others from the two dowels and
6
cut-outs of the VF slide assembly.
Screw
5
(M1.7 × 2.5),
lock ace, p2
VF slide assembly
qa Lamp guide (40)
7 Sheet (VF)
q; Cushion LB (40)
Two craws
8 FP-619 flexible board
Projected part
Two screws
1
(M1.7 × 2.5),
lock ace, p2
A
3 Slide the VF slide cabinet assembly and others once
to the deep end, then slant them in the direction of
the arrow A to release the claw portion of the VF slide
assembly and finally pull them out in the direction of the
arrow B and remove them.
Cut-outs
Two dowels
Two craws
qs Illuminator (40)
9 LB-085 board
2-14
Screw
4
(M1.7 × 2.5),
lock ace, p2
qg LCD cabinet assembly
qf LCX032AN-5
qd Prism sheet (40)