Selecting A Device - Mitsubishi Electric WD-52527 Quick Reference Manual

NetCommand® Features
NetCommand Recording (manual
programming without TV Guide On
Screen®)
To start time-delayed recording:
1. Press REC (record).
2. Press ADJUST , ,
to device, Duration, Start Time (press ENTER after
selecting hour, minutes and AM or PM) and Day.
For devices that can select channels, select the
Channel.
3. Select Add and press ENTER to add the recording
to the record list. A message will display on screen
if the addition is successful or if there is a conflict.
4. To exit, press HOME.
To cancel a current recording:
1. Press DEVICE. The Device Selection menu will
display.
2. Highlight the recording source with ADJUST
or .
3. Confirm that the recording icon is in the Connection
Section next to the TV icon.
4. Press CANCEL. The recording icon will disappear
from the Connection Section (confirming
cancellation).
To view the Record List screen:
1. Press GUIDE while on the Record To screen. The
Record List will display.
2. To cancel a recording, press ADJUST
select, then press CANCEL.
3. To page through the list, press CH
NOTE: A maximum of 32 recordings can be scheduled.
To start recording now:
1. Press REC (record).
2. Review the destination device and duration in the
"Record to" section. Change if necessary.
3. Press REC a second time to start recording.
or to select the Record
, ,
or to
or .

Selecting a Device

Press the DEVICE key to open the Device Selection
menu.
• Without NetCommand: Use to select a viewing
device.
• With NetCommand: Use to select a device to view,
select an audio source, power devices on/off.
Video
Connection
2
3
Section
Section
1 Device Section: Press ADJUST
the highlight to the icon for the device you want to
view or hear. To power a device on/off, highlight
the device icon and press POWER.
2 Video Section: Shows the destination for the
device highlighted in the Device Section.
Connection Section: Shows the other devices
3
currently connected to the device highlighted in the
Device Section.
4 Audio Section: Press AUDIO to access the Audio
Section. Press ADJUST
speakers icon or the A/V receiver icon. To power
the TV or receiver on/off, press POWER.
To Lock/Unlock the TV Guide On
Screen® Video Window
• Always lock the video Window before starting a
recording or moving an existing one.
• For best results, use TV Guide On Screen with
the Video Window locked.
1. With TV Guide On
Screen open, highlight
any channel logo or the
LISTINGS label on the
Service Bar and press
DEVICE MENU.
2. Press ADJUST
select video locked/
unlocked.
Audio
4
Section
1
Device
Section
to move
to select either the TV
to