Panasonic CQ-C8803N Operating Instructions Manual page 40

Troubleshooting
PS does not appear
even if an RDS
station is tuned in to.
("NO PS" appears.)
programs differs
from PTY that was
already set up.
"NONE" appears
when selecting
The clock time (CT)
is not accurate.
An AF station
cannot be received
even if AF indicator
40
CQ-C8803N
Problem
A PS code cannot be received for the reason of bad receiving conditions, etc.
a A PS code appears if it is received. Wait for a while until conditions change.
Receiving
When the station changed between programs, the unit could not receive the PTY
code.
An appropriate programme is searched for and tuned in to after receiving a
a
corresponding PTY code. Therefore, wait for a while.
Any specified PTY programs cannot be received. There is no desired programme
being broadcast in your area.
PTY. a Select another PTY, or wait until a desired programme starts.
The unit received a station broadcasting time that is not appropriate for you, or the
unit is receiving a station that does not broadcast time.
a Receive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
There is little difference in receiving conditions between the current station and AF
stations. Update of the AF list ended in failure.
a Wait until the AF list is successfully updated. For unstable reception, tune in
to a stable station by the hand.
lights.
Possible cause Possible solution
a