Panasonic CQ-C8803N Operating Instructions Manual page 21

You can register frequencies via an FM transmitter inte-
grated in a mobile audio device. Then, you can call up
those frequencies with a single touch of button from the
CD mode, changer mode, etc. (default: FM 87.50 MHz)
Frequency setting
1
Receive an FM broadcast station via
your FM transmitter.
2
Press [MENU] to call up the menu
screen.
3
Press [ } ] or [ { ] to select "D·M SET".
4
Press [BAND] to register the frequen-
cy.
5
Press [MENU] to resume the normal
mode.
Note: If there is something wrong with treble sound,
activate the radio audio filter according to your equip-
ment. (a page 21)
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL](MENU) for 2
sec. or more.
2
Press [BAND]
(SET) to adjust.
3
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
)
a
( page 19
DISP
PTY
DISP
PTY
DISP
PTY
Listening to an FM station via an
FM transmitter
Hold down [TA] (D·M) for 2 sec. or more.
RADIO AUDIO FILTER
You can select the reception status (band) of FM stations
registered on D·M.
: Off (default)
: High cut level 1
: High cut level 2 (same processing at receiving
an FM station)
CQ-C8803N
CQ-C8803N
D M
TA TA
21