Picture Formats For Av Sources - Fujitsu Siemens Computers MYRICA VQ40-1 Operating Manual

Picture formats for AV sources

Downloaded From TV-Manual.com Manuals ENGLISH
TV - 24 - N24
Fill all
Picture format
S Press the [MENU] button to open the main menu.
S
With the button [ ] or [
Y B
menu and press the button [
S Select the desired picture format [
The selected picture format appears on screen.
S To change between formats you can also repea-
tedly press the [FORMAT] button on the remote
control.
Auto zoom
This function evaluates the current picture format and
switches automatically between 4:3 and 16:9.
Fill all
In this format setting the picture is adapted in horizontal
and vertical directions so that a full screen display is al-
ways visible.
Normal
This format setting displays a PAL 4:3 picture with the
correct side ratio. Dark stripes are visible on the left
and right-hand edges of the picture.
16:9
In this mode the picture is scaled horizontally to the
complete picture width, approx. 25 % in total being cut
off the top and bottom of the picture.
This mode should be used for the full screen display
of 16:9 letterbox video material (with a black bar at top
and bottom).
16:9 Top
Picture in 16:9 letterbox format with subtitles.
14:9
With a 14:9 zoom the picture is enlarged vertically by
a total of 15 %, i.e. approx. 15 % of the picture content
is cut off vertically. Horizontally the picture is reduced
in size in comparison with the full picture display by
15 %, i.e. narrow bars are displayed on the right and
left.
14:9 Top
Picture in 14:9 letterbox format with subtitles.
Panorama
This format setting scales the input signal automati-
cally in horizontal and vertical directions to fit the full
screen, but horizontally not linearly. i.e. the picture con-
tents in the centre of the screen are displayed as the
original and towards the edges more intense scaling
takes place.
S To close the menu press the red button.
Operator control
] select the <Display>
].
"
] / [ ].
A "
21