Operator Control; Switching On / Off; Channel Change (Programme Change); Volume And Sound Settings - Fujitsu Siemens Computers MYRICA VQ40-1 Operating Manual

Operator control

Operator control

Switching on / off

Indication on operation (Power On) (blue)
Indication when on standby (orange)
IR sensor for remote control

Channel change (programme change)

Volume and sound settings

12
Downloaded From TV-Manual.com Manuals
Channel information
S To switch on the LCD/plasma TV press the
[POWER] button on the remote control or the button
/MENU on the set.
The indicator Power On / Standby lights up blue on the
LCD/plasma TV.
S To switch off the LCD/plasma TV press the
[POWER] button on the remote control.
The indicator Power On / Standby lights up orange on
the LCD/plasma TV.
If a signal is pending at any input, the LCD/plasma TV
is switched automatically to standby mode after a
/MENU
waiting period.
S Select TV mode by pressing the [TV] button on the
remote control.
With the buttons [P
S Press the button [P
ber.
S
Press the button [P
number.
With the buttons [0...9] on the remote control:
Select the channel number directly by pressing the
buttons [0...9].
With the channel overview in the OSD menu:
S Press the button [LIST] on the remote control to dis-
play the channel overview on the display.
S Select a channel with the buttons [
the remote control.
S Press the red button to close the channel overview.
With the buttons [VOL
control:
S Press the button [VOL
S
Press the button [
] / [P ] on the remote control:
Y B
] to increase the channel num-
Y
] to reduce the channel
B
BY " A
] / [ VOL] on the remote
" A
] to increase the volume.
"
VOL] to reduce the volume.
A
ENGLISH
] on