Presser Foot - Singer S900 Instruction Manual

FRINGE FOOT
This foot is used to create 3-dimensional texture on fabrics,
producing a fringe effect. Fringe can be created two ways:
with the loops left intact, or with the loops trimmed on one side
MACHINE PREPARATION
Fringe Foot. Tighten the thumb screw securely.
from tunneling in while sewing.
EYELASH FRINGE
sew.
toward the back. To create an eyelash effect, use a sharply
pointed scissor to trim the thread loops close to the fabric on
the right-hand side of the loops. Lightly brush the threads with
LOOPS INTACT FRINGE
next to one another as desired. Remove the presser foot and
screw securely.
OPEN TOE FOOT
This foot provides a more visible view of the area that you will
be stitching. Because of its open area at the front, you can
see markings much more easily.
2. With a marking pencil or chalk, trace the outline for your
Use a fabric marker that can be removed easily in case the
stitching does not cover it completely.
88