Singer S900 Instruction Manual page 48

STRAIGHT STITCHING
B. Reverse stitch button
C. Programmable needle up/down button
E. Presser foot lifter
2. Pull both threads under the presser foot toward the back of
3. Place the fabric under the presser foot and lower the
presser foot lifter.
the needle enters the fabric.
When reaching the edge of the material, stop the sewing
machine.
until the needle is at its highest position. Raise the presser
foot, draw materials to the rear and cut off excess thread
with the thread cutter located on the bottom of face cover
as shown.
To keep the seam straight, use one of the numbered guide
lines on the needle plate. The numbers indicate distance from
the needle at its center position.
narrow seams.
46
A
1
B
C
D
2
5
6
E F
4
3
mm
mm
mm
mm
mm