Network; Wi-Fi - D-Link DWR-730 User Manual

Section 3 - Configuration
The Network pages allow you to check the current status of your Local Area Network (LAN), and make changes to LAN settings.
This section allows you to configure the IP settings for your wireless network.
IPv4
IP Address:
Enter the IPv4 address for your Wi-Fi network. If you change
this address, you will need to enter the new address in your
web browser's address bar in order to access the web-based
configuration utility.
IP Subnet Mask:
Enter the IPv4 subnet mask for your Wi-Fi network.
Click Apply to save the current configuration.
IPv6
IPv6 Address:
Enter the IPv6 address for your Wi-Fi network.
Prefix for LAN:
Enter the prefix to be used to delegate IPv6 addresses to the
LAN.
RA Autonomous:
Check the box to set the router announcement mode to
autonomous.
RA On-Link:
Check the box to enable router announcement on-link
Click Apply to save the current configuration.
DNS Name
DNS Device Name:
Enter your router's DNS device name in the field provided.
Click Apply to save the current configuration.
D-Link DWR-730 User Manual

Network

Wi-Fi

22