Panasonic C7113U Operating Instructions Manual page 36

Troubleshooting
No playback or
disc ejected
Sound skipping or
Sound skipping
due to vibration
Disc unejectable
No playback or
disc ejected
The CD-R/RWs that
are playable on
other devices are
not playable on
Sound skipping or
36
CQ-C7413U/C7113U
Problem
The disc is inserted upside down.
a Insert a disc correctly.
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc.
a
There is a flaw or foreign material on the disc.
noise
a Remove the foreign material, or use a flawless disc.
The unit is not sufficiently secured.
a Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
a Make the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
Press and hold the [ u ] (OPEN) for more than 2 seconds when the face plate
a
is open (disc forced ejection). In case that the disc forced ejection does not
work, consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other factors.
a Unplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
The disc has unplayable formatted data.
a Refer to the description about MP3/WMA for playable sound data except CD-
DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are playable on
other devices such as a PC.
a Make CD-R/RWs in different combination of media, recording software and
recorder after referring to the description about MP3/WMA.
this unit.
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc. For MP3/WMA, refer to
a
the description about MP3/WMA.
noise
Playing VBR (Variable Bit Rate) files may cause sound skipping.
Play Non-VBR files.
a
Possible cause Possible solution
a