Introduction; Specifications; General Information - Woods DS8.50 Operator's Manual

Cutting Height
Cutting Width
Overall Width
Overall Length: Pull Type (25" Tires)
Overall Length: Mounted
Minimum Tractor HP: Pull-Type
Minimum Tractor HP: Mounted
Tractor PTO RPM (Q = 1000)
Number of Blade Spindles
Blade Overlap
Number of Blades
Driveline w/Slip Clutch: Pull-Type
Driveline w/Slip Clutch: Mounted
Side Frame Thickness
Weight (W/Belting): Pull-Type
Weight (w/Belting): Mounted
Blade Speed (Feet per Minute) 540/1000
Blade Rotation
Wheel Size: Pull-Type
Wheel Size: Mounted
Torsion Protection
 Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating
and maintaining your cutter. Read it carefully. It fur-
nishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying

4 Introduction

SPECIFICATIONS

DS8.50
DS8.50Q
150"
99"
40 HP
55 HP
Cat 6 CV
Cat 5
1/4"
2,205 lbs
2,055 lbs
15" Rims
21" Laminated
25" Severe Duty
29" Airplane
16" Laminated

GENERAL INFORMATION

ARNING
DSO8.50
DSO8.50Q
2" - 12"
96"
103"
--
122"
--
40 HP
540 or 1000
--
Cat 5
1/4"
--
2,335 lbs
14,886/15,126
Left Spindle: CCW; Right Spindle: CW
--
21" Laminated
Slip Clutch and Flex Couplers
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left direction. These are determined by standing
behind the equipment facing the direction of forward
travel. Blade rotation is clockwise (right) and counter-
clockwise (left) as viewed from the top of the cutter.
DS10.50
DS10.50Q DSO10.50Q
120"
127"
162"
111"
50 HP
65 HP
2
4"
4
Cat 6 CV
Cat 5
1/4"
2,400 lbs
2,255 lbs
15,974/16,232
15" Rims
21" Laminated
25" Severe Duty
29" Airplane
16" Laminated 21" Laminated
MAN1168 (Rev. 5/27/2016)
DSO10.50
--
128"
--
50 HP
--
Cat 5
1/4"
--
2,510 lbs
--