Reset the filter lifetime
counter
When you replace the filters, it is important
that you also reset the filter lifetime counter
afterwards. This allows the purifier to be in
sync with the filter lifetime.
After you have replaced the filter, reset the
filter time:
1
Switch off the purifier and unplug it.
2
Replace the air purifier filter (see 'Replace
the filters').
3
Put the plug in the power socket and
switch on the purifier again.
4
Press and hold the
seconds.
Note
•
Reset the purifier when it is plugged in and switched
on.
•
Only replace the filters when you see the
start flashing.
button for 2
light
EN
15