Specifications - JSG M2AP01 Operation & Installation Manual

SPECIFICATIONS

Specifications
Ingress Protection
Battery
Battery Life
Operating Temperature
Dimensions
Cable
Buzzer
Outputs
Detection Input
Activation Output
Fuse
Response Time
Failure to heed the following warnings including misuse, modifying
parts, or using worn or damaged parts may result in equipment damage
and/or serious personal injury, fire or property damage.
• Do not alter or modify any part of this equipment.
• Do not attempt to repair or disassemble the fire suppression system
• Always use recommended protective clothing and equipment.
• Check components regularly and replace worn or damaged parts
• Always check equipment for proper operation before each use,
Page 4
IP66
15V 1.5Ah Lithium Manganese Dioxide with internal fuse
Min 2 years + 6 months warning
-40°C to + 70°C (Celsius)
DIA 97mm depth 55mm (housing only)
1.1meter 10 core x 0.75mm
98dB @ 1 meter in free air
3 x relay contacts @ 30V 1 Amp Max
Max 50 meters LHD wire with 4K7 EOL resistor
12V 1 Amp
5 internal fuses - LittleFuse Nano2A
Max 1 second
while the system is pressurised.
immediately.
making sure safety devices are in place and operating properly.