Automatic Operation; Cleaning And Maintenance; Disassembling The Device - Fakir VIGOR PLUS Instruction Manual

following sequence of modes:
Quiet Low

Automatic Operation

Keep pressing FAN button until the
device run under automatic operation
(the LED will show AUTO)
Under automatic operation, the device
automatically switches to the proper
running modes (MED or LOW)
according to the level of odor, dust or
irritants in the air as detected by the
sensor. As the air is purified, the
device will automatically switches
back to LOW or QUIET modes.
Timer ON/OFF
Press TIMER button to set the
operation timing.
Under the TIMER function, the
operation timing will be set according
to the number of times you pres the
TIMER button. The LED will show the
following sequence of timing:
1 Hour 2 Hour
Ion-UV On/Off
Press ION-UV button to set the
operation of ion
ON/OFF Açma/Kapama
FLOW Hava Akımı
AUTO Otomatik Çalışma
TIMER Zaman Ayarı
ION-UV İyon Lambası
Med Hi AUTO
8 Hour

Cleaning and Maintenance

Before cleaning and maintenance
please turn off and unplug the device.
Cleaning and maintenance every 2 to
3 months are recommended.

Disassembling the device

Carefully lay down the device with its
front facing up, take down the device
according to the following 4 steps (Put
the device back together with the
same steps but with opposite
sequence):
1. Take down the front cover
Please attach firmly at the connecting
locations.
• Press the locking tabs on both sides
of the device.
• Gently lift up the front cover.
When assembling
• Firmly reconnect the front cover back
to its original position.
• Make sure the two locking tabs
reattached immovably.
2. Take down the plasma dust
collector
• Push the plasma dust collector
towards the bottom of the device.
• Hold the two tabs and lift up the dust
collector.
16