Supplied Accessory - Icom IC-4088S Instruction Manual

Place the unit in a secure place to avoid inadvertent use by children.
AVOID
using or placing the transceiver in direct sunlight or in
areas with temperatures below 0°C or above +55°C.
The use of non-Icom battery packs may impair transceiver perfor-
mance and invalidate the warranty.
Even when the transceiver power is OFF, a slight current still flows
in the radio. Remove the alkaline cells or battery pack from the
transceiver when not using it for a long time. Otherwise, the in-
stalled batteries will become exhausted.
DO NOT
modify the transceiver for any reason.
KEEP
the transceiver from the heavy rain, and
it in the water. The transceiver construction is
tant
, (meets JIS grade 4) not waterproof.
When the low battery indicator blinks, the performance of the trans-
ceiver cannot be guaranteed.
DO NOT
transmit for more than 3 sec., when operating with the
group mode and/or call ring function. Transmission in a form other
than speech is limited, and should be of a duration of less than 3
sec. as a compliance to ACA requirements in Australia.

SUPPLIED ACCESSORY

This device complies with Standard Australia
Specification No. AS/NZS4365-1996.
• Belt clip ....................................... 1
NEVER
immerse
weather resis-
ii