Table of Contents
Advertisement
Screen displays (continued)
24 Marker display
During shooting, pressing the ZEBRA button
once or twice will display the marker.
25 Optical Image Stabilizer
Displayed when Optical Image Stabilizer is ON.
26 Scene filename display (Page 50)
27 Remaining battery capacity display
When using Panasonic-manufactured batteries
compatible with this product, the remaining
battery capacity is displayed in minutes.
Time remaining will be displayed after a brief
pause.
•
The battery display will change
→
as battery capacity decreases.
displayed in red when less than 3 minutes
are remaining, and
battery is empty.
•
Remaining battery capacity may not be
displayed correctly when using in high or
low temperatures, or when the battery has
not been used for a long period of time.
To ensure that remaining battery capacity
is displayed correctly, use the battery
completely from a fully-charged state, and
charge the battery again. (Remaining battery
capacity may still not be displayed correctly if
the battery has been used for long periods in
high or low temperatures, or if the battery has
been recharged a large number of times.)
•
The remaining battery capacity display is
a guideline and may change according to
usage conditions.
•
The remaining battery capacity display will
momentarily disappear when switching
between modes, when conducting REC
CHECK operations or when changing the LCD
brightness since the capacity is recalculated at
these times.
•
Not displayed when using AC adapter.
28 Operation status display
REC:
Recording
PAUSE:
Recording standby
CHK:
Rec check
:
Playback
:
Playback paused
INDEX [
]: Playback paused at INDEX
position
(
): Frame-by-frame playback
(Frame-by-frame reverse
playback)
78
display
→
→
→
will flash when the
(
(
(
):
Self-portrait recording display
No display: Cannot record (no card, etc.)
: Recording in progress, during transition to
the recording pause mode
: Recording paused (recording standby)
: Warning display
29 Standby mode display
Displayed when camera is set to standby mode
30 Recording function display
Displayed when the PREREC MODE item on
will be
the settings menu RECORDING SETUP screen
is set to ON.
•
P- will be displayed on the screen.
31 Monitor audio level meter
When you press the AUDIO MON/ADV button,
the sound volume output from the built-in
speaker and headphone jack is displayed.
32 Safety zone
The range of the zone is indicated by the
SAFETY ZONE item (Page 94) on the
DISPLAY SETUP screen.
4:3
This indicates the position which is
cropped to 4:3.
90%
This indicates the range (90%) in which
signals can be displayed by an ordinary
homeuse TV set.
Will not be displayed in LCD monitor or
viewfinder when the FOCUS ASSIST item on
the settings menu SW MODE screen is set to
EXPANDED.
): Skip (reverse skip)
): Fast forward/fast playback
(Rewind/fast reverse playback)
Paused in final scene (paused in
initial scene)
Advertisement
Table of Contents
