Table of Contents
Advertisement
Shooting techniques for different targets (continued)
Wave form monitor function
An image wave form can be displayed on the LCD
monitor by pressing the WFM button while in CAM
mode.
Press the button again to return to the normal
display.
•
It is possible to switch between a wave form
display and a vector display in the WFM item
(Page 89) in the settings menu SW MODE
screen.
•
Wave forms will not be displayed in the
viewfinder.
•
This function cannot be used while the focus
assist function is in operation.
•
Wave forms cannot be recorded.
•
While wave forms are displayed, use the
viewfinder as well since part of the recording
screen will be hidden by the wave forms.
44
Adjusting the volume while shooting
Adjusting the volume
AUDIO MON/ADV
AUDIO MON/ADV
If you are monitoring the sound through
headphones while shooting, you can adjust the
volume with the AUDIO MON/ADV buttons.
•
To adjust the recording level. (Page 49)
•
Volume adjustments will be memorized if the
power is turned off by moving the POWER switch
to the OFF position.
Advertisement
Table of Contents
