Frame-By-Frame Playback; Adjust Volume; Viewing Images On A Television; Checking The Date And Time - Panasonic AG-HMC152EN Operating Instructions Manual

Panasonic memory card camera-recorder operating instructions
Hide thumbs Also See for AG-HMC152EN:
Table of Contents

Advertisement

Useful playback functions (continued)

Frame-by-frame playback

1
Tilt the Operation lever in the
during playback to pause the clip (or press
the PAUSE button on the remote control).
2
Press the AUDIO MON/ADV buttons (or
press the STILL ADV buttons on the remote
control).
Hold down to continuously advance frame by
frame until the button is released.
Hold down the STILL ADV button on the
remote control to continuously advance
frame by frame. Press the PAUSE button to
cancel.
MENU
PUSH-ENTER
AUDIO MON/ADV
Camera
When the + button is pressed, the images are
advanced in the forward direction, and when the
- button is pressed, they are advanced in the
reverse direction at half-second intervals.
To return to normal playback, tilt the Operation
lever in the
direction (play) (or press the PLAY
button on the remote control).

Adjust volume

1
The volume of audio output from the
internal speaker and headphone jack can be
adjusted with the AUDIO MON/ADV buttons
during playback.
Press the ZOOM/VOL buttons if using the
remote control.
MENU
PUSH-ENTER
AUDIO MON/ADV
Camera
70
direction
EXEC
SEARCH
PLAY
SEARCH
PAUSE
STILL ADV
STILL ADV
SKIP
STOP
SKIP
or
Remote control
EXEC
DATE/
ZOOM
TIME
VOL
or
Remote control

Viewing images on a television

You can view the images on a television if you
connect the unit to a TV set using an AV cable
(not included), HDMI cable (not included) or
component video cable (included).
1
Connect the camera-recorder to the TV set.
(Page 73)
2
Start playback.
To show the information that appears on the
viewfinder and LCD on a television, press
the EXT. DISPLAY button on the remote
control.
Press the EXT. DISPLAY button again to
clear the display.
EXT
DISPLAY
DATE/
TIME

Checking the date and time

Press the DATE/TIME button on the remote
control to show the date and time of shooting on
the viewfinder and the LCD monitor. The display
changes as follows each time you press the button.
Time
Date
Time and Date
No display
START/
PHOTO
STOP
SHOT
ZOOM
VOL
START/
PHOTO
EXT
STOP
SHOT
DISPLAY
DATE/
ZOOM
TIME
VOL

Advertisement

Table of Contents
loading

Table of Contents