Function - Lincoln MKC Quick Reference Manual

Function

Lincoln Drive Control* Active Park Assist
with Parallel Parking,
This feature intelligently integrates
Perpendicular Parking and
chassis and powertrain systems for
Parallel Park Out Assist
personalized ride comfort, steering,
handling, powertrain response and
Active Park Assist detects an
sound. Choose between two default
available parallel or perpendicular
settings or customize your own.
parking space and automatically steers
the vehicle into the space (hands-free)
You can configure which of the
while you control the accelerator,
Drive Control modes are active
transmission selector and brakes.
when your vehicle is in drive (D) or in
The system visually and audibly
Sport (S). The configuration remains
instructs you to park your vehicle.
active until modified from the main
menu on the information display. To use active park assist,
press the button located on
Comfort: Provides lower steering
the right side of the shifter.
efforts and a more fluid suspension.
For perpendicular parking,
Normal: Delivers an engaging drive
press the button twice.
experience with confident handling.
To stop the parking procedure,
Sport: Increases handling and
grab the steering wheel or press the
control with a sporty feel.
control again.
14
Park Out Assist determines the Adaptive Cruise Control*
clearance to the front and rear of your
Automatically adjusts your speed to
vehicle and automatically steers your
maintain a set distance between your
vehicle out of a parallel parking space
vehicle and the vehicle in front of you
(hands-free) while you control the
in the same lane. You can set the gap
accelerator, transmission selector and
distance between your vehicle and the
brakes. The system visually and
vehicle in front of you by pressing the
audibly instructs you to enter traffic.
and buttons on the steering wheel.
See the Parking Aids chapter of your
Note: Driving aids do not replace the
Owner's Manual for more details.
need to watch where the vehicle is
moving and brake where necessary.
Note: The driver is always
Refer to the Cruise Control chapter
responsible for controlling the
of your Owner's Manual for safety
vehicle, supervising the system,
information, details and limitations.
and intervening, if required.
SelectShift® Automatic
Rear View Camera
Transmission
This system provides a video image
The transmission gives you the ability
of the area behind the vehicle. The
to manually change gears, if you
display automatically appears in the
like. To use SelectShift, press drive
touchscreen when the vehicle is in
(D). Use the paddle shifters, located
reverse (R) and uses green, yellow
on the steering wheel, to manually
and red guides to alert you of your
select gears. Pull (+) to upshift, pull
proximity to objects.
(–) to downshift. The system stays
in manual control until you make
another shift button selection.
BLIS® (Blind Spot Information System)
and Cross Traffic Alert*
BLIS uses radar sensors to help you
determine if a vehicle may be in your blind
spot zone. The Cross Traffic Alert feature
warns you of vehicles approaching from the
sides when the transmission is in reverse (R).
BLIS and Cross Traffic Alert display a yellow
indicator light in your exterior mirrors and
the Cross Traffic Alert also sounds tones
and displays messages to warn you from
which direction vehicles are approaching.
Refer to the Driving Aids chapter in your
Owner's Manual for more information.
Note: Visibility aids do not replace the need
to watch where the vehicle is moving. Refer
to the Owner's Manual for safety information,
more details and system limitations.
*if equipped *if equipped
Lane Keeping System*
This system offers drivers features to help them stay within their lanes,
Alert, Aid and Alert + Aid.
A forward-facing camera in the rearview mirror reads lane markings. Should the vehicle drift
out of its lane without the driver using a direction indicator, the system can provide one
or both of the following:
Alert: Sends vibration pulses to the steering wheel.
Aid: Provides steering torque to help direct the driver to steer the vehicle back into its lane.
Alert + Aid: Provides both vibration pulses and steering torque to help the driver stay in their lane.
To switch this system on or off, use the control on the end of the direction indicator.
Front Parking Aid*
This system sounds an audible warning tone if there is an obstacle near the vehicle's front bumper. As the vehicle
moves closer to the obstacle, the rate of the warning tone increases in frequency. The front sensors automatically
activate when the transmission selector is in any position other than park (P) and the vehicle speed is below 6 mph (10
km/h). See the Parking Aids chapter in your Owner's Manual for complete information.
Auto Hold
Auto Hold can assist you when stopping at traffic lights or while in traffic jams by holding the brakes when you stop the
vehicle. Press the Auto Hold button on the right-hand side of the touch screen to switch the system on. The Auto Hold
button lights. When the system is on and actively holding the vehicle, AUTO HOLD displays in the instrument cluster.
When you press the accelerator pedal, Auto Hold automatically releases the brakes. In some situations, Auto Hold
may apply the electric parking brake and illuminate the brake warning lamp in the instrument cluster.
Auto Hold turns off when you power down your vehicle, or you can switch the feature off manually by pressing the
Auto Hold button. Switch Auto Hold off if you are towing a trailer or having the vehicle towed.
2 01 7 M K C
15