Advertisement
6． ． ． ． Connections ( setup） ） ） ）
The ZM-6 Rack Mixer is suitable for a wide variety of applications; the diagram below is just one example of a
setup configuration. Make sure all knobs are at " zero " and all devices are off. First, connect all input sources;
next, connect the stereo outputs to the power amplifiers and/or recording equipment (for example, tape
decks). Plug your mixer into AC power. Now you are ready to switch everything on.
Important: Always switch on your audio input sources such as turntables or CD players first, then your mixer,
and finally amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer,
and then input devices.
Note：Incorrect connections will result in malfunctions. Make sure that all connections have been made
correctly before operation.
ZM-6 PROFESSIONAL 19" RACK MIXER USER MANUAL PAGE 4/5 V-
Advertisement
