SECTION 4 Set-Up & Operation (continued)
Let water fully drain into brewer
before lowering the Handle.
Lift the Handle. Water starts to drain
Place mug on the Drip Tray.
from the Cold Water Reservoir into
If you want to use a taller mug,
you can slide the Drip Tray out,
If you add more than 10 oz.,
but you will lose the benefit of
excess water goes into the
the tray to catch the excess
Do noT remove foil lid or puncture K-Cup
Insert the K-Cup
pack into the
Wait until all water has drained
(5 seconds) into the brewer
before lowering the Handle
Do not add a K-Cup
you are performing the initial
The BREW Button will flash blue. Press the
The BREW Button will flash red to
indicate that the water is heating. After
about 2 minutes, the BREW Button will
CAUTION: Do not lift the Handle
turn solid red when the beverage starts
Remove used K-Cup
Enjoy your beverage! Your brewer is ready to use
again or you can power it off.
As a safety feature, brewer automatically
shuts off after 90 seconds.
pack after brewing.
If completing the initial cleansing brew,
pack will be hot.
discard hot water into the sink. Your brewer
is ready to use again.