Bench Testing (Optional) - Motorola PTP 300Series Deployment Manual

It is advised that the link be configured and tested on a bench before the final installation of the
units on a pole or a mast. The following steps give details of how to connect an ODU to a PC in
order to check the configuration details, change the IP settings or modify the license key. For the
purpose of these tests, normal off-the-shelf Ethernet cables can be used.
Power Checks
Step 1: Connect the RJ45 at one end of a cable to the ODU.
Step 2: Undo the retaining screw of the PIDU Plus and hinge back the cover.
Step 3: Plug in the ODU to PIDU Plus Cable, ensuring that it snaps home.
Step 4: Put the cover back and tighten the screw.
Step 5: Plug in power lead using a cable appropriate for the installation.
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Bench Testing (Optional)

6