Connecting To The Ac Outlet - Panasonic SDR-H50 Operating Instructions Manual

Connecting to the AC outlet

The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
"live" as long as the AC adaptor is connected to an electrical outlet.
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
3
A
1
Connect the AC cable to the AC
adaptor and the AC outlet.
2
Connect the DC cable to the AC
adaptor.
3
Connect the DC cable to this unit.
A Push the centre of the DC cable until it locks.
≥ Do not use the AC cable with any other
equipment as it is designed only for this unit.
Do not use the AC cable from other equipment
with this unit.
2
Removing the DC cable
While pressing button B, move C in the
direction of the arrow to unlock it and then
remove the DC cable.
≥ Hold the DC cable with your hand so that it
does not fall.
1
C
B
17
LSQT1346