Resetting The Operating Hours Counter For The Grease Filters - Miele DA 6700 D Operating And Installation Instructions

Cleaning the grease filters in a
dishwasher
 Place the filters as upright as
possible in the lower basket, with the
short sides upright, ensuring the
spray arm is not obstructed.
 Use a proprietary household
dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the cleaning agent
used, cleaning the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
refitting them.
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the cooktop.
Cleaning and care
 If a grease filter is inadvertently
refitted upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the operating hours
counter for the grease filters
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, touch
the grease filter control  for approx.
3 seconds, until only the 1 is flashing.
The grease filter symbol  goes out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum,
 Touch the grease filter control  for
approx. 6 seconds, until only the 1 is
flashing.
27