Makita 6821 Instruction Manual page 7

CAUTION:
*When fitting the screw onto the point of the bit, be careful not to push in on the screw. If
the screw is pushed in, the clutch will engage and the screw will rotate suddenly. This
could damage a workpiece or cause an injury.
*Make sure that the bit is inserted straight in the screw head, or the screw and/or bit may
be damaged.
*Do
not continue unnecessary clutching operation
MAINTENANCE
CAUTIO N
:
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should
be performed by Makita Authorized or Factory Service Centers, always using Makita
replacement parts.