Makita 6821 Instruction Manual page 6

Switch action
To speed is increased by increasing pres-
To start the tool, simply pull the trigger.
0
sure on the trigger. Release the trigger to
stop.
For continuous operation, pull the trigger
and then push in the lock button. To stop
the tool from the locked position, pull the
trigger fully, then release it.
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the "OFF" position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Move the revers-
ing switch lever to the
"+"
position for
clockwise rotation or the
"a"
position for
counterclockwise rotation.
Reversing Clockwise
I
switch lever
7
rotation
c3
Counterclockwise
I
rotation
CAUTION:
.Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
direction of rotation before the
tool
stops may damage the tool
Operation
Fit the screw on the point of the bit and
place the point of the screw on the surface
of the workpiece to be fastened. Apply
pressure to the tool and start it. Withdraw
the tool as soon as the clutch cuts in. Then
release the trigger.
6