Index Introduction ................4 Service Centre ................4 Intended use ................5 Package content ..............5 Symbols explication ..............6 Safety notes ................6 Chassis montage with motors and speed controllers ....9 Centre of gravity ..............20 Technical data ..............21 Declaration of conformity ............21 Spare parts list ..............22 Recommended accessories ..........22 Notes on environmental protection ........23 Care and maintenance ............23...
3D Copter and first of all to safely control your models. If you experience any trouble during operation, take the instructions to help or ask your dealer or Graupner Service Centre. Due to technical changes, the information may be changed in this manual without prior notice.
Read through this entire manual before you attempt to assem- ble or use or use the 3D Copter. Graupner/SJ constantly works on the development of all pro- ducts; we reserve the right to change the item, its technology and equipment.
Symbols explication Always follow the information marked with the CAUTION WAR- NING symbol. The signal word WARNING indicates the potential for serious injury, the signal word CAUTION indicates possibility of lighter injuries. The NOTE is an important information that warns you about pos- sible material damages.
Page 7
Only use the components and spare parts that we recommend. Always use matching, original Graupner plug-in connections of the same design and material. Make sure that all of the plug-in connections are tight. When dis- connecting the plug-in connections, do not pull the cables.
Page 8
Never touch the turning propellers, this can cause serious injury. The propellers must be mounted securely, thrown parts can cause serious injury. Keep long hair, loose clothing such as scarves, loose shirts or similar well away from the danger zone of the revolving propel- ler, they may be withdrawn by the propeller, flying debris can cause serious injury.
Chassis montage with motors and speed controllers For assembly, you need a 2 mm Allen key and a Phillips screw- driver Package content of the chassis kit 2x 16530.11 16530.20 12x 20mm 2x 40mm 4x 16520.5 2x 16530.14 16530.30 16x M3x6 4x M3x6 8x M3x17 16x M3x8...
Page 10
PACKAGE CONTENT OF THE ASSEMBLY COMPONENTS 2x S7051 2x S7052 4x S3057 1x S8446 2x 3D Prop right, 6x3 2x 3D Prop left, 6x3 1x 2975.D35 2x 3391.8 1X 1587.200.R 15X S8436 10 / 24 16530_jh_V1...
Graupner declares that the product is conform to EU norms. EMV 2004/108/EC: EN 61000-6-1; EN 61000-6-3 Voltage module + SBEC Graupner declares that the product is conform to EU norms. EMV 2004/108/EC: EN 61000-6-1; EN 61000-6-3 21 / 24 16530_jh_V1...
Other interesting, actual accessories, such as FPV goggles, transmitters, cameras, propellers, batteries, motors and speed controllers for your Race Copter are available in the Accessories area for the respective items on our website in the online shop: www.graupner. de Recommended accessories ...
The present construction or user manual is for informational pur- poses only and may be changed without prior notice. The cur- rent version can be found on the Internet at www.graupner.de on the relevant product page. In addition, the company Graupner has no responsibility or liability for any errors or inaccuracies that may appear in construction or operation manuals.
Need help?
Do you have a question about the Alpha 300 Q and is the answer not in the manual?
Questions and answers